FATEK P5070S - Keyence PLC Connections; Keyence KV-3000;5000;5500;7500 (Ethernet)

196
Within the Link configuration window in FvDesigner:
Under Interface Type select Ethernet
Under Manufacturer select YASKAWA Electric Corporation.
Under Product Series select MP Series Extension (Ethernet).
Enter the IP Address that was written into the PLC.
Verify the parameters match the window above.
2.12 Keyence
KV-3000/5000/5500/7500(Ethernet)
2.12.1.1 Communication Setting
Item
Default Setting
Remark
Signal Level
Ethernet
Internet Protocol
0.0.0.0
Port
8501
PLC Station No.
0
Communication Method
HOST-LINK