34
Set Transmission Speed to 19200
Set H/W Type to RS-485
Check the Sum Check checkbox
Verify the Station Number is consistent with the one set in FvDesigner.
Note: For more detailed information please refer to the PLC manual.
Connecting PLC to HMI
Within the Link configuration window in FvDesigner:
Under Interface Type select Serial
Under Manufacturer select Mitsubishi Electric Corporation
Under Product Series select Mitsubishi FX2N-485BD.
Under Port select COM3
2.2.2.4 Wiring Diagrams
PLC RS422 Pinout
To Next Page
Loading...