Fazzini FM5000C User Manual

III-3
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
User Manual
ECG III OVER LOAD
Low
range.
and clean the patient’s skin
if necessary.
ECG V OVER LOAD
Low
ECG LL OVER LOAD
Low
ECG LA OVER LOAD
Low
ECG RA OVER LOAD
Low
ECG V1 OVER LOAD
Low
ECG V2 OVER LOAD
Low
ECG V3 OVER LOAD
Low
ECG V4 OVER LOAD
Low
ECG V5 OVER LOAD
Low
ECG V6 OVER LOAD
Low
ECG COMM ERR
High
There is a problem with the
communication between the
module and the monitor.
Restart the monitor. If the
problem is still there, please
contact the serviceman.
SPO2 COMM ERR
High
TEMP COMM ERR
High
NIBP COMM ERR
High
HR ALM LMT ERR
High
The alarm limit for a certain
parameter has been
accidentally changed.
Please contact the
serviceman.
PVCS ALM LMT ERR
High
ST ALM LMT ERR
High
RR ALM LMT ERR
High
SPO2 ALM LMT ERR
High
NS ALM LMT ERR
High
NM ALM LMT ERR
High
ND ALM LMT ERR
High
PR ALM LMT ERR
High
TEMP1 ALM LMT ERR
High
ECG NOISE
High
There is too much
interference signal in ECG
signal.
Check if there is any
possible source of signal
noise from the area around
the cable and electrodes and
check the patient for great
motion.
HR EXCEED
High
The measured parameter
value is not within the
specified measurement
range.
Please contact the
serviceman.
PVCs EXCEED
High
ST EXCEED
High
ST1 EXCEED
High
ST2 EXCEED
High
ST3 EXCEED
High
ST4 EXCEED
High
ST5 EXCEED
High
ST6 EXCEED
High
ST7 EXCEED
High
RR EXCEED
High
SPO2 EXCEED
High
PR EXCEED
High

Fazzini FM5000C Specifications

General

Brand	Fazzini
Model	FM5000C
Category	Monitor
Language	English