FM5000C - FM5000PLUS
Maternal/Fetal Monitor
The following operations can be performed in the trend table review window:
1) Display thetrend tables of different resolutions
Select [RES.] and select the resolution in the pop-up list box. Available resolutions includes 1 minute,
5minutes, 10minutes, 30minutesand 60minutes.
2) Display trend data of different parameters
Press or to show the trend data of the parameters not in current view.
3) Observe earlier or later trend data
Press or to observe the earlier or later trend data respectively.
10.3 NIBPMeasurement Review
This monitor can display the latest 2000 groups of NIBP measurement data in the NIBP measurement
review window.
How to enter NIBP measurement review window:
1. Click [INFO RECA.] on-screen key;
2. Select [NIBP RECALL] to enter the NIBP measurement review window, as shown below:
Figure 10-3 NIBP measurement review window
Data is displayed in the sequence of time from earlier to later. Each screen can display 10groups of NIBP
measurement data. Select or to view the later or earlier data respectively. Maximum data of2000
groups can be displayed. But if NIBP measurement data are more than2000 groups,the monitor will only
save the latest 2000 groups and theearlier ones will be overwritten.
To Next Page
Loading...
General