FM5000C - FM5000PLUS
Maternal/Fetal Monitor
6.1.1 Discharging Patient
How to discharge a patient:
1. Click patient information area or click [PAT MANAGE] on-screen key and the [PATIENT
MANAGE]menu will displayed.
2. Click [Discharge] and the patient will be discharged.
3. Then the patient information area shows prompt message “No Patient Admitted”.
6.2 Patient Case Management
6.2.1 Save Patient Case
The patient cases can be saved manully or automatically. Saving patient case manually means the patient cases
are saved manully by users during real-time monitoring; while saving patient case automatically
means a
new
patient case will generate automatically during real-time printing.
How to save patient case manually:
1. Access [MAIN MENU]→[Case List]
2. Click [Case save] and set it to [ON]. If [Case save] is set to [OFF], no patient cases will be saved.
3. During monitoring, click [SAVE CASE] on-screen key and start to save the patient case. Any patient
case which has been saved for more than 10 seconds will be stored after pressing the [Stop Save]
on-screen key;
4. All the saved patient cases can be viewed in the [Case list] window.
How to save patient case automatically:
1. Access [MAIN MENU]→[Case List]
2. Click [Case save] and set it to [ON]. If [Case save] is set to [OFF], no patient cases will be saved.
3. Click [Least time] and select the least print time so that the printed waveform can be saved as a patient
case. Available options include 5 minutes, 10 minutes, 15 minutes and 20 minutes. For example, 5
minutes means if the print time for real-time fetal waveform printing is less than 5 minutes, the
printed waveform will not be saved as a patient case in [Case List] window; and so on.
4. All the saved patient cases can be viewed in [Case List] window.
6.2.2 View Patient Case
All the saved patient cases can be viewed, deleted and loaded in the [Case list] window. The specific steps
are as follows:
1. Access [MAIN MENU]→[Case List]→[Case list];
2. The [Case list (SD)] window displays all the saved patient cases. [Case list (SD)] means the displayed
To Next Page
Loading...
General