FM5000C - FM5000PLUS
Maternal/Fetal Monitor
How to set the FM Threshold:
(1) Select TOCO parameter area or waveform area and the [TOCO SETUP] menu will be displayed;
(2) Select [FM Limen] and select [10%], [20%], [30%], [40%], [50%], [60%], [70%], or [80%].
14.4.4 Setting the FM Counting Mode
There are three kinds of FM counting mode supported by the monitor, [Auto/Manual], [MANUAL]and
[OFF].
[Auto/Manual] means the monitor can count the FM automatically according to the clinical situations
and also the pregnant woman can hold the FM marker and count the FM manually when she feels the
fetal movement.
[MANUAL] means the pregnant woman holds the FM marker and counts the FM manually when she
feels the fetal movement.
[OFF] means the FM will not be counted.
How to set the FM counting mode:
1. Select FHR waveform area, in the pop-up [FHR SETUP] menu, select [Fetal Move.] and select the
FM counting mode;
2. Or select FHR1 or FHR2 parameter area, in the pop-up [FHR1 SETUP] or [FHR2 SETUP] menu,
select [Fetal Move.] and select the FM counting mode.
14.5
Fetus-awakening
Acoustic Stimulator
The fetus-awakening acoustic stimulator is designed to awaken the fetus during ultrasound examination.
To Next Page
Loading...
General