Fazzini FM5000C - Connect the Sensors

3-2
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
User Manual
Note
 If there are significant errors in the self-test, the system will alarm.
 Check all monitoring functions to ensure that the monitor is functional.
 Turn on the monitor again one minute after turning off.
Warning
 If any damage to the monitor or an error message is found, do not use this monitor for patient
monitoring. Please contact the biomedical engineer of your hospital or maintenance engineer of
Our company.
3.4 Connect the Sensors
Connect the required sensor to the monitor and the monitoring part of patient.For the correct connection
methods and related requests, please refer to relevant chapters.