FM5000C - FM5000PLUS
Maternal/Fetal Monitor
Preface
Thank you for purchasing our FM5000 maternal/ fetal patient monitor! This manual gives detailed description to
the Monitor concerning its performance, operation, safety guide, and precautions. Reading through this manual
is the first step to get familiar with the equipment and make the best use of it.
Following symbols indicates some important notes that you have to pay special attention to:
Points to be noted to avoid injury to the patient and the operator.
Important points to be noted.
Intended Use
This product is intended to be used in surgeries, ICU wards, CCU wards and other places requiring monitoring
for patients. It can display in real time the fetal heart rate (FHR), TOCO, fetal movement mark, maternal heart
rate, ECG, non-invasive blood pressure (NIBP), SpO
2
, pulse rate, RESP, and TEMP etc.
Working Environment
1. Working temperature: 5℃~40℃
2. Relative humidity: ≤80%
3. Atmospheric pressure: 860hPa~1060hPa
4. Supply voltage: 220V ±22V
5. Power frequency: 50Hz ± 1Hz
Storage Temperature
1. Ambient temperature: -20℃~55℃
2. Relative humidity: ≤95%
3. Atmospheric pressure: 50kPa~106kPa
Please read through this Manual carefully before use.
To Next Page
Loading...
General