126
OPERATION
30. Variotronic Ti
The TeachIn function enables repetitive operational sequences to be saved and retrieved when nee-
ded.
An individual set of functions and relative factors can be selected (e.g. an engagement/disengagement
point can be selected for the rear PTO according to distance, time, lift height, or can be selected ma-
nually by pressing a button).
Text-module
NOTE:
On the driver seat is a start-off protection. If the driver's seat is unoccupied for more than 3 se-
conds, the pull-away cut-out is activated. Variotronic Ti functions cannot be played back.
If a function or a trigger is required during recording, which is not already in the configuration
list, adapt the configuration list (see OPERATION Section 30.9).
30.1 Functions
Text-module
Rear power lift
(Raise, Control, Stop, Fast feed-in).
Front power lift
(Raise, Control, Stop, Floating
position).
Rear PTO
(ON - OFF).
Front PTO
(ON - OFF).
Electric hydraulic valves
(Raise, Lower, Stop, Floating
position).
Vario transmission
Cruise control (ON - OFF).
4-WD
Automatic mode, 100%, OFF.
Differential locks
Automatic mode, 100%, OFF.
Electronic engine control
(ON-OFF, calling up stored engine
speeds).
30.2 Triggers
Text-module
NOTE:
'RED' light = function active.
'GREY' light = function not active.
Distance
(travelled).
Time
(elapsed).
Manual
(by pressing the button).
Lift height of rear power lift.
Lift height of front power lift.
To Next Page
Loading...
Need help?
General
