EasyManua.ls Logo

FENDT 926 Vario - Transmission and Axle Drive Oil Servicing

FENDT 926 Vario
267 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
149
CARE AND MAINTENANCE
9. Front PTO
Front PTO oil level
Operation_Pic_number:1
Fill oil through filler hole (A).
Oil drain screw (B).
Oil level: fill up to overflow at filler hole (A).
Fig.30
10. Transmission and
axle drives
10.1 Changing the transmis-
sion oil
Change the oil only when the transmission oil is
warm.
Draining the transmission oil
Operation_Pic_number:1
Place oil drip pan underneath the transmis-
sion.
Unscrew drain plug (A), remove and allow oil
to drain completely.
Clean the drain plug, refit and tighten.
Operation_Pic_number:1
Unscrew drain plugs (A) on either side of the
brake housing and allow oil to drain comple-
tely.
Clean the drain plugs, re-insert and tighten.
Fig.31
Fig.32

Table of Contents

Related product manuals