FENDT 926 Vario User Manual

255
TECHNICAL DATA
5. Lubrication chart
5.1 Filling points
Text-module
Engine:
turn dipstick (B) and
remove, fill with
engine oil (A).
Transmission:
Turn dipstick (A) and
remove, fill with
transmission oil.
Axle drives, each
side:
Pour in oil through
filler hole (B).
Front axle
differential gear:
Fill up to overflow at
filler hole (A).
Front axle hub
drives:
fill until the oil spills
over, with hole on
the left and marker
in horizontal
position.
Front PTO:
Fill up to overflow at
filler hole (A).
Lift shaft:
fill until oil is approx.
40 mm below filler
hole (A).
Hydraulic system:
Unscrew filter cover
(A). Fill with oil.
Brake and clutch
system:
Fill container
(arrowed) with
Pentosin CHF 11S.
Cooling system:
Pour clean, low-lime
water containing
anti-freeze into con-
tainer (arrowed).
Windshield washer
system:
Pour fluid into
container (A).
Compressed-air
system:
Fill antifreeze
container (B) with
ethyl alcohol.
Fuel tank:
fill with fuel through
filler neck (A).

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available