153
CARE AND MAINTENANCE
12. Power lift
Checking oil level in power lift
Operation_Pic_number:1
● Unscrew plug (A).
● Check oil level with a test strip (e. g. cable
tie).
The oil level must be approx. 40 mm (vertically)
below the bottom edge of the filler hole.
Fig.41
13. Hydraulic system
13.1 Checking oil level in hyr-
draulic system
Operation_Pic_number:1
The level (A) in the hydraulic oil reservoir oil level
is shown on the dashboard. When filling with oil
to MAX, the rear power lift must be lowered and
all cylinders retracted.
DANGER:
When working on the hydraulics,
always switch off the engine and
ensure that the tractor is safely
parked (hand brake applied, wheels
chocked).
The system is under high pressure.
Ensure that all pressure is released,
and that mounted implements are
lowered before any work is carried
out on the hydraulics.
When checking for leaks, to avoid
injury, use suitable material (e.g. a
piece of wood).
Regularly check hydraulic hoses,
and replace if they show signs of
damage or ageing! Replacement
hoses must meet the technical
requirements of the implement
manufacturer!
Always ensure the utmost
cleanliness when working on
hydraulic components.
Fig.42
To Next Page
Loading...
Need help?
General
