FENDT 926 Vario User Manual

16
OPERATION
2.2 Glow and starter switch
Operation_Pic_number:1
Text-module
0 = Ignition off, key can be removed.
I = General ignition, key cannot be removed
+ preheating (automatic).
II = Starting + ignition.
2.3 Combination switch
Operation_Pic_number:1
Text-module
A = Right indicator.
B = Left indicator.
C = 1. With lights switched on: toggle low
beam, high beam.
2. With lights switched off headlight flas-
her.
D = Horn
E = Windshield washer system (wipers run
automatically).
F = Windshield wipers with intermittent and
continuous operation.
Fig.3
Fig.4
2.4 Steering wheel adjustment
Operation_Pic_number:1
Text-module
● Pull up lever and adjust steering wheel to the
desired position (see also OPERATION Sec-
tion 16).
2.5 Quick reverse
Operation_Pic_number:1
● Press button (A).
The tractor slows to a standstill, then accelerates
in the opposite direction up to previous transmis-
sion ratio (see also OPERATION Section 7.6).
WARNING:
Never adjust the steering wheel
while the tractor is moving!
Fig.5
Fig.6

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available