EasyManuals Logo

FENDT 926 Vario User Manual

FENDT 926 Vario
267 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
OPERATION
5.2 Cold weather operation
Text-module
Keep battery well charged; fill with winter fuel. At
temperatures below -12 °C, add flow improver or
up to 30% petroleum.
Top up engine oil with HD-SAE 10W;
Antifreeze in coolant 35 - 50 vol.-%.
Engine warmer
(optional).
Operation_Pic_number:1
Connect engine warmer to mains supply
(220 V) using the cable supplied.
Warming time at least 3 hours, depending on
outside temperature. Preheating is only neces-
sary in extreme cases.
Text-module
Compressed air system
Open the antifreeze pump (see also OPERA-
TION Section 22.1).
5.3 Tool box
Operation_Pic_number:1
Removable tool box (A).
Fig.41
Fig.42
6. Starting and stopping
the engine
6.1 Memory function
Start tractor.
The following image appears.
Tractor in neutral position
(stationary)
Operation_Pic_number:1
Key F4 = Activate selected settings (see OPE-
RATION Section 28.1).
Key F5 = Activate the base settings.
If no key is activated, after about 10 seconds the
tractor's base settings are activated.
DANGER:
Start the engine from the driver seat
only. Never short circuit the battery.
Never leave the engine running in a
confined space!
Do not use priming fuel (e.g.
Startpilot)!
Fig.43

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FENDT 926 Vario and is the answer not in the manual?

FENDT 926 Vario Specifications

General IconGeneral
Engine Power260 hp
TransmissionVario continuously variable transmission
Fuel Tank Capacity500 liters
Weight10, 500 kg
Engine type6-cylinder turbocharged
Rated engine speed2100 rpm
Displacement7.5 liters
Number of cylinders6
Maximum speed50 km/h
Tire OptionsMultiple options available

Related product manuals