FENDT 926 Vario User Manual

158
CARE AND MAINTENANCE
16.3 Replacing the recirculating
air filter
Operation_Pic_number:1
● Dismount air nozzles (right and left) and re-
move filter (A).
Fig.56
17. Air conditioning
Text-module
Switch on the air conditioning once a month
(even in winter) for about 10 minutes, setting the
ventilation to recirculated air mode (see OPERA-
TION Section 3.2).
Clean roof fan filter and recirculating air filter
(see CARE AND MAINTENANCE Section 16).
17.1 Condenser
Operation_Pic_number:1
● If dirty, blow through or spray the condenser
(A) from the inside.
Checking coolant level
Operation_Pic_number:1
● Switch on system. The compressor must also
be running. At an engine speed of 2,000 rpm;
white ball (A) in the sight glass of the fluid tank
must float.
Topping up with coolant or replacing the tank /
dryer can only be undertaken in the workshop.
NOTE:
The blue ball turning pink indicates moisture
in the system.
Fig.57
Fig.58

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available