FENDT 926 Vario User Manual

130
OPERATION
Unlock EPC, select PTO
Operation_Pic_number:1
● Start tractor.
● Unlock rear EPC with quick lift key (A).
● Select rear PTO speed using button (B).
Joystick key assignment
Operation_Pic_number:1
● Use rotary switch (P1) or
● F1 key to specify which joystick button is used
for an action (Record, Start, Stop, Pause,
etc.).
The active button on the joystick is shown in co-
lour on the Vario terminal.
Fig.317
Fig.318
Operation_Pic_number:1
● Press the selected joystick button (A).
● Display (B) changes from START to STOP.
Start recording
Operation_Pic_number:1
● Lower the rear lifting gear using Quick Lift
switch (A), to the position set with the depth
control (B).
● At the desired engagement point for the rear
PTO, press button (C).
● Press selected joystick button (D) and recor-
ding is ended.
When recording has ended, the following sub-
menu appears on the Vario terminal.
Fig.319
Fig.320

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available