134
OPERATION
30.6 Retrieving stored data
Text-module
Operation_Pic_number:1
Use keys (F1 - F4) to select operating parameter
set.
NOTE:
The menu returns automatically to the pre-
vious level.
Press key (F1). The following menu
appears.
Fig.331
30.7 Changing operational se-
quences manually
Text-module
Operation_Pic_number:1
Operation_Pic_number:1
● Press key (A) once - PAUSE.
● Press key (A) again, operational sequences
are switched manually using the keys.
The changes are not saved.
Press key (F3). The following menu
appears.
Press key (F5)
To change to another menu level.
Fig.332
Fig.333
To Next Page
Loading...