FENDT 926 Vario User Manual

204
IMPLEMENTS
1. Reversing device
Text-module
NOTE:
Before changing to reverse mode, switch en-
gine OFF.
Operation_Pic_number:1
The steering column can be swivelled if:
● Steering wheel fully forward.
● Steering wheel fully lowered.
● Push seat forward slightly.
● Adjust seat height to the middle position (hold
seat up and let air out).
● Backrest of driver's seat folded forward (on
the seat). (if fitted, remove backrest exten-
sion).
Pull lever (A) backwards. Turn steering column
in clockwise direction. The lock must engage.
NOTE:
In reverse mode, accelerator pedal mode is
not available.
DANGER:
Use of the reversing device is
forbidden on public roads.
Fig.1
Operation_Pic_number:1
Symbol (A) is shown on the multiple display.
Text-module
Return to previous function.
Text-module
Press key and hold.
Then press button.
Fig.2

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available