FENDT 926 Vario User Manual

210
FAULTS AND REMEDIAL ACTIONS
Fault-module
Fault-module
Fault-module
Fault-module
20. Driving mode selection not completed. Mechanical neutral
position!
Repeat driving mode selection.
21. Variotronic Ti
Cause
Remedial Action
Ground speed too low when playback started. Increase the ground speed. Start playback again.
22. Variotronic Ti
Cause
Remedial Action
Speed greater than 25 km/h when a playback
process starts.
Reduce speed of travel. Start playback process
again.
23. Seat switch
Cause
Remedial Action
Driver seat empty for more than 3 seconds. Sit on the driver seat.
If the Tractor Management System (TMS) is
active, engine speed is reduced.
In accelerator pedal mode, the direction of travel
must be actuated again while the tractor is
actively stopped.
Playback of Variotronic Ti functions must be
started again.

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available