FENDT 926 Vario User Manual

232
FAULTS AND REMEDIAL ACTIONS
Operating console
Text-module
Transmission
Fault code Cause Effect and remedy
3.1.01
3.1.02
3.1.03
3.1.04 Programming error. Call workshop.
3.1.05
3.1.06
Fault code Cause Effect and remedy
4.1.01 Joystick acceleration switch
I-IV faulty.
Auxiliary operation.
4.1.04 Clutch pedal potentiometer
faulty.
No monitoring of transmission ratios.
4.1.05 Pressure sensor II defective. Reduced comfort.
4.1.06 Accelerator rotary control faulty. Load limit control not functioning.
4.1.07 High-pressure sensor faulty. Peak loads in the transmission are no
longer monitored.
4.1.08 Operating range I/II analogue
device (function angle device)
faulty.
Operating range switching I/II not opera-
tional.
4.1.20 Accelerator cancellation rotary
control incorrectly calibrated or
not calibrated.
Accelerator mode not working.
4.1.21 Reverse mode switch is defec-
tive.
Reverse mode operation and accelerator
mode no longer possible.
4.1.22 Accelerator cancellation rotary
control faulty.
Restriction in operation of accelerator
mode.
4.1.23 Joystick signal Tempomat on
faulty.
Auxiliary operation.
4.1.24 Hand brake switch faulty. Hand brake automatic mode not working.
4.1.25 Joystick F-R quick reverse si-
gnal faulty.
Auxiliary operation.
4.1.26 Joystick signal accelerator
mode faulty.
Accelerator mode not working.
4.1.27 Armrest signal rapid reversal
(F/R rocker) faulty.
Rapid reverse not working.
4.1.28 Track width adjustment faulty. Auxiliary operation.
4.1.29 Joystick park position signal
faulty.
Auxiliary operation.
4.1.2A Bevel pinion rpm sensor direc-
tion signal faulty.
Auxiliary operation.
4.1.2B Driving mode I/II selection but-
ton faulty.
Tractor remains in current dricing mode.
No further selection until ignition ON/
OFF.
4.1.2C 'Neutral selection' button faulty. Auxiliary operation.
4.1.2D Quick Reverse button (steering
column) faulty.
Quick Reverse only available with the
joystick.
4.1.2E Joystick key 'v+' faulty. Auxiliary operation.
4.1.2F Joystick v- faulty. Auxiliary operation.
4.1.31 Direction signal speed sensor
for hydrostatic unit faulty.
Auxiliary operation.
4.1.32 Joystick activating button faulty. Auxiliary operation.
4.1.42 Speed sensor hydrostatic unit
faulty.
Auxiliary operation.

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available