Festo CPX-CMAX - Page 96

Axis controller CPX-CMAX
96 Festo – P.BE-CPX-CMAX-SYS-EN – en 2017-09b – English
Index
A
Abbreviations 94..........................
Absolute displacement encoder 94...........
Adaptation 94............................
Air pressure reservoir 34....................
Axis string 94.............................
B
Base load 25.............................
C
CMAX
– Commissioning options 49................
– Connection and display components 16......
– Mode of operation 16....................
– Parameterisation options 49...............
– Tasks of the CMAX 16....................
Communication profile FHPP 49..............
Control interface 94.......................
Coupling play 22..........................
CPX error numbers 69......................
CPX modules 94..........................
CPX node 94.............................
CPX terminal 94...........................
Current consumption 44....................
D
Diagnostics
– CPX-MMI 87............................
– Messages 70...........................
Diagnostics options 57.....................
Displacement encoder 21, 23................
– Absolute 94............................
– Incremental 95..........................
Drive 23, 94..............................
E
Error level (faults and warnings) 67...........
Errors 70................................
F
Faults 67................................
– CPX error messages 69...................
Festo Configuration Tool (FCT) 49, 94..........
Festo Parameter Channel (FPC) 94............
FHPP 49.................................
Filter regulator 34.........................
Fixed stops 23............................
Force control 95..........................
Functions 94.............................
G
Groups (faults and warnings) 69..............
H
Homing 94...............................
Homing run after POWER ON 56..............
I
Identification 95..........................
Incremental displacement encoder 95.........
Installation instructions
– Air pressure reservoir 34..................
– Compressed air supply 33.................
– Compressed air tubing and fittings 38.......
– Conversion of systems 37.................
– Drive with compressed air supply on
one side 37............................
– External potentiometer 24................
– Filter regulator 34.......................
– Proportional directional control valve 34.....
Intended use 11..........................
IPC 95..................................
J
Jog mode 95.............................
L
LEDs 58.................................