2. Commissioning
2−27
Festo P.BE−CPX−FB13−EN en 0811c
Install GSD and symbol files
Install the GSD and symbol files in the following steps:
CPX_059E.GS*
Source and remarks for the selection:
see section 2.1.3.
1. Start the installation function from the STEP 7 menu:
[Options] [Install GSD File ...]
2. Update the hardware catalogue from the STEP
7 menu:
[Options] [Update Catalog].
All available CPX modules in the hardware catalogue are
displayed under PROFIBUS−DP > Additional Field Devices >
Valves > Festo CPX Terminal. You can start the selection and
configuration of your modules.
Station selection with STEP 7
1. If the hardware
catalogue is not open:
Click on the catalogue icon (see Fig.2/7 1 ).
The hardware catalogue will be displayed.
2. In the hardware catalogue, open the folder:
PROFIBUS DP > Additional Field Devices > Valves".
The Valves folder is displayed when you have installed the
GSD (see above).
Pull the station type Festo CPX
terminal" onto the line of
the DP master system 2.
The Properties PROFIBUS interface" dialogue window
is displayed 3.
3. Select the PROFIBUS address identical to the selected
setting on the DIL switch in the switch module
(see section 1.2.2) and close with OK.
The icon of the valve terminal will be
displayed on the line
of the DP master system.
To Next Page
Loading...
