FiberHome AN5506-04 Series User Manual

4
Web Configuration Guide
Figure
4.26 MAC Addresses Filtering
2
. Configure parameters relevant to filtering as required. Table
4.15 describes the parameters.
3. Click Apply to apply and save the configuration.
T
able 4.15 Parameters for MAC Address Filtering
Item Description
MAC
Filtering
Enable
Enables or disables the MAC address
filtering function.
After setting,
click Apply
below to take
effect.
MAC
Filtering
Blacklist /
Whitelist
Select the filtering mode. The white list and
black list modes are global configuration,
which cannot be enabled simultaneously.
u Whitelist indicates that the data
complying with the rules defined in the
filtering rule table will be allowed to
pass.
u Blacklist indicates that the data
complying with the rules defined in the
100

FiberHome AN5506-04 Series Specifications

General

Model	AN5506-04 Series
Category	Network Hardware
Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Ports	4 GE ports, 2 POTS ports
WLAN	802.11b/g/n