Fichet-Bauche KelNet Lock - Identification Configuration

KelNet Lock - User Guide A0U571B
32
5.7 Identification configuration
Press
, and set the number of days after which the PIN
code is disabled if not used.
Menu
Identification
Manager 1
Inactive ID
Code expiry period
Anti-pass back
Fixed delay
Choose a rights' group and press
Press
, and set the number of days after which a new
code is requested.
Press , and set the anti-pass back mode.
The anti-
pass back mode defines the conditions which authorize
an already identified user to identify himself a second time:
• Disable: the second identification is possible.
• Manual: Manual reactivation on the Input Unit.
• Correct ID: Reactivation with a correct identification of a user.
• Other group
: Reactivation with a correct identification of a
user of another rights' group.
• CIT procedure: Reactivation with a correct identification
of a
user of another rights' group.
is displayed at the end of the CIT procedure.
Press , and
fix the opening delays' value in minutes for
this family.
Value = 255 if delay is defined in schedules.
The 8 groups have the same parameters.
Same parameters as Manager 1
OTC
When using One Time Codes, the application software
used for generating one-time codes should be installed
in a secure environment.
Operator CIT
Operator
Super Manager
Code + fp
Manager 2
Manager CIT