Fichet-Bauche KelNet Lock - 6 Changing the Configuration with a Usb Key; Introduction; Writing Configuration with a USB Key

KelNet Lock - User Guide A0U571B
40
6 CHANGING THE CONFIGURATION WITH A USB KEY
6.1 Introduction
It is possible to download a configuration to the KelNet lock with an USB key which contains a new
configuration made with the Configuration Tool.
And it is possible to save the KelNet lock configuration on a USB key to manage it with the Configuration
Tool.
6.2 Writing configuration with a USB key
To access USB menus, the user must have rights to manage the configuration with a USB key.
The new configuration is taken into account immediately.
Menu
Maintenance
Download access
USB memory key
OTC mode
OTC key
This procedure allows writing the lock configuration with
the contents of the USB key generated by the
Configuration Tool.
• Open the battery lid.
• Insert the USB key + .
• Choose Write configuration + .
• Wait until the transfer is complete.
• Remove the USB key.
• Close the battery lid.
Menu access
Security