Fichet-Bauche KelNet Lock - 9 Factory Settings

A0U571B - KelNet Lock - User Guide 9. FACTORY SETTINGS
53
9 FACTORY SETTINGS
The default factory settings are:
Identification /
code PIN
Rights Opening right Schedule
Super Manager 1
1 – 00000000
Enable
All
No
6
Manager 1
2 – 00000000 Enable
Change codes
3 to 19
Yes 1
Operator 01
to
Operator 17
3 - 00000000
à
19 – 00000000
Disable No Yes 1
Manager 2
20 – 00000000 Disable
Change codes
21 to 29
Yes 2
Operator 1 Bio
to
Operator 9 Bio
21 – 00000000
à
29 – 00000000
Disable No Yes 2
CIT Manager
30 – 00000000 Disable
Change codes
31 to 39
Yes 3
CIT Operator 1
to
CIT Operator 4
31 - 00000000
à
39 – 00000000
Disable No Yes 3
Super Manager 2
99 - 00000000
Disable
All
No
6
Schedules:
• Schedule 1: from 6:00 am to 10:00 pm all days.
• Schedule 2: from 6:00 am to 10:00 pm all days.
• Schedule 3: from 6:00 am to 10:00 pm all days.
• Schedule 6: from 0:00 am to 0:00 pm all days.
No annual schedule, no exceptional closed periods, no exceptional opening periods, and no public holidays
are defined.
Delays:
• Open delay = 0 minute.
• Duress alarm procedure delay = 10 minutes.
• Emergency blocking delay = 30 minutes.
• Automatic blocking delay after closing procedure = 0.
• Time out for retracted bolt = 10 minutes.
General settings:
• Duress alarm mode = last digit + X (default value: 0, therefore disabled) .
• Wrong identification blocking rule = "Increasing blocking time".
• No Interlocking rule.
• No "4 eyes mode"
• No closing procedure by identification.
• No re-identification after delay time out.
• No input / output function. Input I1 – Door boltwork switch