A0U571B - KelNet Lock - User Guide 3. USING THE LOCK
9
3 USING THE LOCK
3.1 User categories
The users are distributed in 3 groups:
■ Super managers: There are 2 super managers. The Super managers have authority over the managers.
Each super manager can change the user code of another super manager with the Input Unit.
■ Managers: The managers can have authority over the operators
■ Operators: The “standard” users of the lock.
3.2 Identification settings
A user is identified by:
■ His user ID.
■ His pin code from 6 to 10 figures:
• For B class, the minimum length is 6 figures.
• For C class, the minimum length is 7 figures.
• For D class, the minimum length is 8 figures.
• User ID: 1 or 2
• Default code: 00000000.
Different identification modes are possible:
■ Code only:
• Enter your user ID and press the key.
• Enter your PIN code and press the key.
■ Code + Fingerprint (optional):
• Enter your user ID and press the key.
• Enter your PIN code and press the key.
• When the code is validated, the fingerprint is requested: scan your finger with the biometric reader.
See chapter 7 “FINGERPRINT” for more details.
It is possible to configure a lock with fingerprint identification on its own (without a code). This is
only authorized on a lock without certification, only available on request.
To Next Page
Loading...