Fichet-Bauche KelNet Lock - Secure Unit Configuration

A0U571B - KelNet Lock - User Guide 5. SECURE UNIT CONFIGURATION
33
5.8 Secure Unit configuration
Displays the Module Identification number.
Menu
Secure Unit
MID
Inputs
Outputs
Access autho. time (G1)
PB
ID after delay
Closing by ID
Bolt inside (mn)
Delay after closing
Alarm digit
Motor speed
Enable or disable identification after opening delay.
Enable or disable identification for SU closing.
Delay (min) after which the lock locks itself (if door is closed).
Delay (min) after which the lock cannot be unlocked after a
closing procedure.
Number to add to the last figure of the PIN code to generate
a duress alarm.
Define the speed of the motor.
O1/I5, O2/I5
IL
Red
Green
Push button of the Secure Unit.
See below in the document for more details on possible inputs.
Secure Unit inputs.
Secure Unit outputs.
Input Unit front Led (red or green).
See below in the document for more details on possible outputs.
Closing hour 1
Enables defining a closing hour.
Closing hour 2
Enables defining a second closing hour.
Access authorization time after remote identification G1 (15
to 180 seconds). Value 000 (deactivated).
Parameters
I1, I2, O1/I5, O2/I6
IL