176 MS-9050 Series Manual — P/N 52413:F 10/22/2010
Central Station Communications Transmittal Priorities
The table below shows UL listed receivers which are compatible with the MS-9050UD.
1. With version 3.9 software
2. With 685-8 Line Card with Rev. 4.4d software
3. With 9002 Line Card Rev. 9035 software or 9032 Line Card with 9326A software
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. Surgard System III software version 1.6
8. Surgard MLR-2 software version 1.86
9. With DSP4016 and V1.6 Line Card
10. With 124060V206B and 124063 Line Card Rev. B
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm Communica-
tor/Transmitter is compatible with the Central Station Receiver, utilized by the monitoring service,
prior to installation. The Compatibility Table provides a list of compatible receivers and associated
software versions for the receivers. Changes in the hardware and/or software by the receiver man-
ufacturers may affect the receiver compatibility with the FACP DACT. After completing the instal-
lation, communication between the DACT and Central Station Receiver must be tested and
verified.
Format
FBI
CP220FB (1)
Ademco
685 (2)
Silent Knight
9000 (3)
Silent Knight
9800 (4)
Osborne Hoffman
2000E (5)
Radionics
6600 (6)
Surgard
System III(7)
Surgard
MLR-2(8)
Surgard
MR-2000(9)
Ademco
MX8000(10)
4+1 Ademco Express
4+2 Ademco Express
3+1/Standard/1800/2300
3+1/Expanded/1800/2300
3+1/Standard/1900/1400
3+1/Expanded/1900/1400
4+1/Standard/1800/2300
4+1/Expanded/1800/2300
4+1/Standard/1900/1400
4+1/Expanded/1900/1400
4+2/Standard/1800/2300
4+2/Expanded/1800/2300
4+2/Standard/1900/1400
4+2/Expanded/1900/1400
Ademco Contact ID
Not Used
Table 5.3 Compatible UL Listed Receivers
To Next Page
Loading...
