98 MS-9050 Series Manual — P/N 52413:F 10/22/2010
Programming Master Programming Level
The following screens will be displayed for each selection:
Enabled
Pressing 1 while viewing NAC Screen #1 will cause the display to change to Enabled No. This will
prevent the selected main circuit board NAC from activating its devices. Each press of the 1 key
will cause the display to toggle between Enabled Yes and Enabled No.
NAC #
1=ENABLED YES
2=TYPE BELL
3=SILENCEABLE YES
NAC Screen #1
NAC #
1=ZONE
00 ** ** ** **
2=SIL INHIBITED NO
NAC Screen #2
NAC #
1=AUTO SILENCE 00
2=CODING
STEADY
NAC Screen #3
NAC #
1=SYNC TYPE S
NAC Screen #4
To Next Page
Loading...
