478182
11
2 THE UNIQUE AQUASMART™ WASH
The AquaSmart is a EcoSmart based washing machine that has two modes of washing, High
Efficiency & Conventional. It is essentially a front loader (high efficiency mode) and a top loader
(conventional mode) washer in one.
Both washing modes start the same way, with a detergent activating wash.
Detergent Activating Wash
AquaSmart™ fills at the selected water temperature, with just enough water
so that the clothes are saturated. This concentrated detergent solution is
then re-circulated through the wash. This thoroughly dissolves and
activates the detergent.
High Efficiency Mode (front loader type wash)
In the High Efficiency mode, the AquaSmart™ fills with just enough water to
lift the clothes off the low profile agitator, so that when it rotates, the clothes
gently roll over each other. This wash uses similar quantities of water to
most Front Loaders and so, not only are there the benefits of water savings,
but also the higher detergent concentrations give optimum soil removal.
Conventional Mode (top loader type wash)
The Conventional mode is the immersion wash all Top Loader users are
familiar with. After the Detergent Activating Wash, the AquaSmart™ fills
with water until the clothes are underwater, whilst gently turning the clothes
over. We recommend this mode when the dilution effect of water can solve
or prevent common wash problems. For example when dye or colour run
can be a problem or when washing sandy towels. Sheets are better
washed in this mode. Some cycles can be used in both modes, whilst
others work in only one.
Cycle Modes Available
Regular High Efficiency
Sheets Conventional
Whites High Efficiency and Conventional
Colors Conventional
Heavy Duty High Efficiency and Conventional
Delicate High Efficiency and Conventional
Easy Iron Conventional
Bulky Conventional
To Next Page
Loading...
Need help?
General
