FISNAR DC100 MAX - Page 44

DC100 MAX Digital Dispenser Operating Manual
© 2023 Fisnar - 44 - DC100 MAX Rev 4
4.
Program Change: Use the or buttons to select if the machine will change from one
program number to the next by shot count (SHOT) or by time (TIME).
5.
Shot: If the program number is to change from one program number to the next by shot count, use
the or buttons to set the number of shots (n) that each program will cycle for, before
changing to the next program number.
6.
Time: If the program number is to change from one program number to the next by time, use the
or buttons to set the duration of time in seconds (s) that each program will remain in,
before changing to the next program number.