FLENDER FLUDEX - Replacement Parts; Ordering Replacement Parts; Spare Parts Drawing and Spare Parts List; Types FNO, FNA, FND

M4602-02en Edition 09/2022 67
Replacement parts
11
11.1 Ordering replacement parts11.1 Ordering replacement parts
By stocking the most important replacement parts at the installation site, you can ensure that
the coupling is ready for use at any time.
Only ever use original replacement parts from Flender. Flender only accepts liability for ori-
ginal replacement parts from Flender.
You can find the available replacement parts for the coupling described here at Spare parts
drawing and spare parts list (Page67).
You can find our contact data for ordering replacement parts at Service and support
(Page63).
Information required when ordering replacement parts
• Flender order number with item
• Flender drawing number
• Coupling type and size
• Part number (refer to Spare parts drawing and spare parts list (Page67))
• Dimensions of the replacement part, for example:
– Bore
– Bore tolerance
– Parallel keyway and balancing
• Special dimensions, for example, flange connection dimensions, intermediate sleeve
length or brake drum dimensions
• Any special properties of the replacement part, such as, for example:
– Temperature resistance
– Electrical insulation
– Operating fluid
– Use in potentially explosive atmospheres
• Quantity
11.2 Spare parts drawing and spare parts list11.2 Spare parts drawing and spare parts list
11.2.1 Types FNO, FNA, FND11.2 Spare parts drawing and spare parts list
When ordering replacement parts, please state the order number of the original delivery. The
order number is stamped on the coupling (blade shell) and indicated on the order-dependent
title page.