Flexim FLUXUS F502TE - Page 133

18 Settings
FLUXUS F502TE 18.3 Libraries
133
UMFLUXUS_F502TEV1-5EN, 2020-05-29
18.3.1 Displaying a scroll list
• Select Show list.
• Press ENTER to display the scroll list as in the program branch Parameter.
The current scroll list is displayed in the lower line.
• Press ENTER to return to the scroll list Material list or Medium list.
18.3.2 Adding a material/fluid to the scroll list
• Select Add Material or Add Medium to add a material/fluid to the scroll list.
• Press ENTER.
All materials/fluids that are not contained in the current scroll list will be displayed in the lower line.
• Select the material/fluid.
• Press ENTER. The material/fluid is added to the scroll list.
18.3.3 Adding all materials/fluids to the scroll list
• Select Add all to add all materials/fluids of the database to the current scroll list.
• Press ENTER.
18.3.4 Removing a material/fluid from the scroll list
• Select Remove Material or Remove Medium to remove a material/fluid from the scroll list.
• Press ENTER.
All materials/fluids of the current scroll list will be displayed in the lower line.
• Select the material/fluid.
• Press ENTER. The material/fluid will be removed from the scroll list.
Notice!
If the material/fluid scroll list is quit by pressing BRK before storing, all changes will be lost.
Special Funct.\...\Material list\user\Show list
Special Funct.\...\Material list\user\Show list\Current list= ↕
Special Funct.\...\Material list\user\Add Material
Notice!
The materials/fluids are displayed in the order in which they have been added.
Special Funct.\...\Material list\user\Add all
Special Funct.\...\Material list\user\Remove Material
>Add Material ↕
Stainless Steel
>Remove Material↕
Stainless Steel