Flexim FLUXUS F502TE - Handling Concept

4 Product description
FLUXUS F502TE 4.2 Handling concept
19
UMFLUXUS_F502TEV1-5EN, 2020-05-29
4.2 Handling concept
The transmitter is operated via the keyboard. The command panel can be accessed by opening the housing cover.
The selected program branch is displayed in angle brackets and capital letters. The complete name of the selected pro-
gram branch is displayed in the lower line.
Select a program branch with key and . Press ENTER.
• par (Parameter)
• mea (Measuring)
• opt (Output Options)
• sf (Special Funct.)
Fig. 4.2: Command panel of the transmitter
1 – LCD display (backlit)
2 – keyboard
3 – transducers
4 – temperature inputs
5 – outputs
6 – power supply
7 – transducer module socket
8 – RS232 service interface
9 – front plate
Tab. 4.1: Description of the program branches
program branch description
Parameter Before starting a measurement, the transducer, pipe and fluid parameters have to be entered in the
program branch Parameter.
Measuring Having entered the transducer distance, the measurement can be started in the program branch
Measuring.
Output Options Channel-related settings such as determination of the physical quantity, unit of measurement and
parameters for the transmission of measured values are set in the program branch Output Options.
Special Funct. Includes global settings which are not directly related to the measurement.
AV AVS AGN ARS AR
1
3 4
2
6
9
5
8 7
>PAR< mea opt sf
Parameter