5 Transport and storage
5.1 Transport FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
22
5 Transport and storage
5.1 Transport
The measuring equipment must be packaged properly for transport (see section 2.7). For weight indications of the trans-
mitter and the transducers see technical specification.
5.2 Storage
The transmitter and the transducers have to be stored in a dry place.
Caution!
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during packaging.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Caution!
When lifting, the center of gravity of the transmitter can be displaced within the cardboard box.
The transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during transport.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
To Next Page
Loading...
