8 Start-up
FLUXUS F502TE 8.9 Interruption of the power supply
71
UMFLUXUS_F502TEV1-5EN, 2020-05-29
8.9 Interruption of the power supply
As soon as the measurement begins, all current measuring parameters will be stored in a non-volatile INIT-resistant
EPROM. In case of a power supply failure, the measurement will be stopped. All entered data remain stored.
After the power supply has returned, the serial number is displayed in the lower line for a few seconds.
The interrupted measurement is continued. All selected output options are still activated. The measurement will not be
continued after the return of the power supply if an initialization has been performed.
F502TE -XXXXXXXX
To Next Page
Loading...
Need help?
General
