Flexim FLUXUS F502TE - Contrast Settings

18 Settings
18.4 Contrast settings FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
134
18.3.5 Removing all materials/fluids from the scroll list
• Select Remove all to remove all materials/fluids from the scroll list.
• Press ENTER. User defined materials/fluids will not be removed.
18.4 Contrast settings
• Select the menu item Special Funct.\SYSTEM settings\Miscellaneous.
• Press ENTER.
• Select the menu item Special Funct.\SYSTEM settings\Miscellaneous to set the display contrast of the
transmitter.
The display contrast is adjusted with the following keys:
• Press ENTER.
It is also possible to reset the display to medium contrast by means of a HotCode.
• Enter the HotCode 555000 (see section 8.4).
Notice!
User defined materials/fluids will always be displayed in the scroll lists of the program branch Parameter. They cannot
be removed.
Special Funct.\...\Material list\user\Remove all
Special Funct.\SYSTEM settings\Miscellaneous
Special Funct.\SYSTEM settings\Miscellaneous\SETUP DISPLAY
increases the contrast
reduces the contrast
Notice!
After an initialization of the transmitter, the display is reset to medium contrast.