Flexim FLUXUS F502TE - Outputs

7 Connection
FLUXUS F502TE 7.3 Outputs
57
UMFLUXUS_F502TEV1-5EN, 2020-05-29
7.3 Outputs
• Connect the output cable to the transmitter.
For the connection of the output cable to the transmitter see section 7.2.1, Fig. 7.12 and Tab. 7.8.
Important!
The max. permissible voltage between the outputs and against PE is 60 V DC (permanent).
Fig. 7.12: Connection of the outputs to the transmitter
Tab. 7.8: Output circuits
output transmitter external circuit remark
internal circuit connection
active current output R
ext
< 500 Ω
binary output (optorelay) circuit 1 U
ext
≤ 28 V DC
I
c
≤ 100 mA
R
c
[kΩ] = U
ext
/ I
c
[mA]
circuit 2
The number, type and the connections of the outputs depend on the order.
R
ext
is the sum of all ohmic resistances in the circuit (e.g., resistance of the conductors, resistance of the ammeter/voltmeter).
AV AVS AGN ARS AR
+
-
I1/I2: 6/8
I1/I2: 5/7
+
-
mA
B1/B2: 2/4
B1/B2: 1/3
U
ext
R
c
V
+
PLC
-
B1/B2: 2/4
B1/B2: 1/3
U
ext
R
c
V
+
PLC
-