Flexim FLUXUS F502TE - Page 50

7 Connection
7.1 Transducers FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
50
7.1.3 Connection of the transducer cable to the junction box
• Remove the blind plug for the connection of the transducer cable (see Fig. 7.6).
• Insert the transducer cable into the junction box.
• Fix the transducer cable by tightening the cable gland.
• Connect the transducer cable to the terminals of the junction box (see Fig. 7.6 and Tab. 7.4).
Fig. 7.5: Connection of the extension cable to the transmitter
1 – cap nut
2 – compression part
3 – basic part
4 – external shield, brushed back
5 – extension cable
Tab. 7.4: Terminal assignment
terminal connection
V transducer (brown cable, marked white)
VS transducer (red cable)
RS transducer (red cable)
R transducer (brown cable)
AV AVS AGN ARS AR
cable gland
1 2 3
70 mm
20 mm
10 mm
4
5
5