Menu Definitions
Use this menu to set Bluetooth to default to "ON"in either Android (SPP (Adrd) or
Apple (BLE (iOS)) - OR-
to "OFF" (Bluetooth not running when the R200 boots up).
This sets a "Timeout" so that the R200 will only be available for Bluetooth con-
nection for the length of time set by the user (once it times out, the R200 has to be re-
set in order to pair with a another device).
USB
The "USB" menu displays the following options:
l "MSD"(Mass Storage Device),
l USB COM ,
l Subnet.
MSD
Mass Storage Device
By following the directions on these screens, the FLIR identiFINDER R200 may be
configured as a Mass Storage Device, similar to a USB memory stick. The file man-
agement utility in the PC's operating system may be navigated to the R200 when
connected by a USB cable, and files may then be transferred to and from the FLIR
To Next Page
Loading...
