FLIR identiFINDER R200 - Page 41

Device
Menu Definitions
identiFINDER R200.
USB COM
Set this to "On" or "Off".
Set "USB COM" to "Off" when using the R200 as a Mass
Storage Device. May require a re-start of the PCor device the FLIR identiFINDER
R200 is connected to in
order to establish communications with the R200 in MSD mode.
Device (cont.)
Subnet
Select from a list of subnet numeric addresses (e.g., "192").
Output
Key Tone Set the tone that sounds shen the keys are pressed to "On" or "Off".
Key Vib Set vibration for key strokes to "On", or "Off".
HdPh Vol Set the volume level for the headphones.
"Device" Menu(continued)
2-34 R200 3/10/2017__1:38 PM