Using FLIR Cloud™ Client for PC or Mac
17
1. Devices Found: Shows systems that are connected to the same network as the com-
puter where the client is installed. Once you connect to the system, it moves to the bot-
tom of the screen.
2. Search: Refresh the list of systems connected to the network.
3. Add: Add checked systems to the client software.
4. Device list: Shows a list of systems connected to the client software, and shows which
systems are online.
5. Add Device: Add a remote system using a Device ID or IP/DDNS address.
6. Delete: Delete the selected system.
7. Import: Import a list of systems from a saved .xml file.
8. Export: Export a list of currently connected systems to an .xml file. This is useful if you
need to re-install the software or if you want to open the same list of systems on a dif-
ferent computer.
9. Edit: Edit the connection details for the system.
10. Manual connect/disconnect: Manually connect/disconnect the system.
11. Delete: Delete system.
17.11 Device Config
The Device Config menu allows you to remotely configure settings for connected systems.
To access the Device Config menu:
• Click
and then click .
• Click on a system in the device list to see the settings available for that system and then
configure settings as needed.
NOTE
The settings available depend on the model of system you have.
#LX400096; r.45547/45547; en-US
112
To Next Page
Loading...
Need help?
General
