Using FLIR Cloud™ Client for PC or Mac
17
The Alarm Prompt menu has the following options:
• Open Audio: Check to enable audio alerts.
• Loop: Check to repeat audio alerts until acknowledged.
• Camera Masking: Select or preview the sound that will play for camera masking
alarms.
• Motion Detect: Select or preview the sound that will play for motion detection.
• Video Loss: Select or preview the sound that will play for video loss alarms.
• Disk Full: Select or preview the sound that will play for disk full alarms.
• Disk Error: Select or preview the sound that will play for disk errors.
• External: Select or preview the sound that will play for external alarms (triggered by
sensor devices, which may not be supported on all systems).
• E-map flashes when alarm occurs: If the camera has alarms enabled and is added
to an e-map, a
appears on the e-map when an event occurs.
NOTE
Click Save to save changes.
17.15.4 Version
The Version menu shows you which version of the client software you are using. It is rec-
ommended to always run the latest version of the software. To find the latest version of the
client software, visit www.flir.com/security/pro, search for the model number of your prod-
uct, click on your product in the search results, and click on the Downloads tab.
#LX400096; r.45547/45547; en-US
125
To Next Page
Loading...
Need help?
General
