Using the Main Menu15
1. From the Main Menu, click and select IPC Upgrade.
NOTE
IPC Upgrade is only available if at least one IP camera channel is enabled. See 15.1.8 Selecting Ca-
ble Type, page 51.
2. Click Browse to search for and select the .bin camera firmware file.
3. Select the Device Type from the dropdown.
4. Check the channels you want to upgrade.
5. Click Start Upgrade. Allow a few minutes for the firmware to upgrade.
CAUTION
DO NOT POWER OFF THE SYSTEM OR DISCONNECT ANY POWER CABLES FOR THE DVR
OR CAMERAS DURING FIRMWARE INSTALLATION
15.2 Info
Info contains menus that show you system information.
#LX400096; r.45547/45547; en-US
53
To Next Page
Loading...
Need help?
General
