FLIR M5104 User Manual

Using FLIR Cloud™ Client for PC or Mac
17
3. Move the camera into the desired start position.
4. Click
to start recording the pattern.
5. Move the camera to the desired end position. Then, click
to stop recording the
pattern.
To run a pattern:
• Select the pattern number and click
.
17.3.4 PTZ Scan
Scan automatically cycles between a left and right point.
To set up scan mode:
1. Click
to open the Advanced controls. Select Scan.
2. Move the camera to the desired left position and click .
3. Move the camera to the desired right position and click
.
To run scan mode:
• Click
.
17.3.5 PTZ Pan
Pan makes the camera continuously pan 360°.
To run Pan mode:
1. Click
to open the Advanced controls. Select Pan.
2. Click
.
17.4 Playback
You can use Playback mode to playback video saved on systems connected to the client.
To access Playback mode:
• Click
and then click to create a Playback tab.
#LX400096; r.45547/45547; en-US
101

FLIR M5104 Specifications

General

Brand	FLIR
Model	M5104
Category	DVR
Language	English