Using the Main Menu15
8. Check recording and system options in the event of tampering: Record Channel, PTZ
Activation, Sequence and Snapshot.
• For options with channel numbers beside them, select the channels that should be
included. For example, check Sequence, then select the channels your system
should sequence through.
• Click Setup next to PTZ Activation to determine how PTZ cameras behave during
a tampering event. Choose an event from the PTZ channel’s dropdown to select
Preset, Tour or Pattern. Enter the ID number for the desired preset viewing point,
tour or pattern to have it executed in the event of tampering. Click OK to confirm.
9. Click OK to save changes.
15.3.10 Configuring Hard Drive Warnings
Hard drive warnings will notify you if an issue is detected with the hard drive.
#LX400096; r.45547/45547; en-US
74
To Next Page
Loading...
Need help?
General
