OPERATION ST51A/ST75A/ST75AV Mass Flow Meters
38 Fluid Components International LLC
ST51 Product Family Basic Setup
The Basic Setup function lets you review and change the
engineering units of the process variables, review and change
the Plenum or pipe size, enable or disable the Totalizer, review
and change device information, reset the operation of the
ST51A/ST75A/ST75AV to the factory settings, review and
change PV Setup and review and change K Factors.
Engineering Units Information
Plenum
The ST51A/ST75A/ST75AV Plenum function lets you review
and edit the plenum data that have been set.
To Next Page
Loading...
