OPERATION ST51A/ST75A/ST75AV Mass Flow Meters
50 Fluid Components International LLC
Command 146: Write Customer Flow Units
See Table 16, page 53, for response code list.
Command 148: Read Plenum Information (Pipe Size)
Pipe Width (Diameter) Value
See Table 16, page 53, for response code list.
Command 149: Write Plenum Information (Pipe Size)
Pipe Width (Diameter) Value
Pipe Width (Diameter) Value
See Table 16, page 53, for response code list.
Command 151: Read Calibration Flow Limits
See Table 16, page 53, for response code list.
Command 152: Write Calibration Flow Limits
See Table 16, page 53, for response code list.
Command 153: Read Calibration Temperature Limits
Temperature Lower Limit Value
Temperature Upper Limit Value
See Table 16, page 53, for response code list.
Command 154: Write Calibration Temperature Limits
Temperature Lower Limit Value
Temperature Upper Limit Value
See Table 16, page 53, for response code list.
To Next Page
Loading...
