Section 3: Model 9100 Controls: Working with Front Panel Controls — Tutorials 3-41
Final Width = 215mm
3.4.4.17 Decreasing Resolution using Shift-Left
This is the reverse process of changing resolution:
Press and release either the Key or the Key. Note that an ikon
representing the shift key appears on the bottom right corner of the screen.
Press and release the
Key.
Note that the cursor will remain with its marked digit (as shown above) unless it is forced
to move to the new least-significant digit.
Repeating the shift-left actions will decrease resolution to its lower limit. The 'Top of
range' message is then displayed.
.
+
0
—
ST UV WX
YZ
THEN
Result
Actions
1 1
OR
2
.
+
To Next Page
